CHANGING WASTE BAG
The UI will instruct the user when it is time to change the Waste Bag. Follow these steps to change the waste bag.
NOTE: Even though the waste bag may not appear full when the user is notified to change it, it is highly recommended to replace the
waste bag when prompted to avoid unnecessary overflow and mess. When waste bag has been changed ensure you confirm the level has been
reset to zero.
Verify that the printer is in READY.1.
Select Tools > Waste Bag (1).2.
Select Replace Waste Bag.3.
A message will appear prompting user to Open the MDM Drawer.4.
Wearing protective nitrile gloves, open the MDM drawer.5.
To Next Page