CLEANING THE USER INTERFACE
Remove any printed parts before cleaning the user interface. This will prevent the printer from initiating any actions if controls are accidently pressed.
Spray a water-based solvent such as Simple Green onto a lint-free soft cloth; do not wipe with a dry cloth or spray cleaner directly onto touch screen.
Gently wipe dirt and part material residue from touch screen using an ammonia-based glass cleaner on a clean, lint-free cloth.
Do Not Use:
A dry cloth on the touch screen
Any cleaning products that contain acetone, MEK or alcohol
Any abrasive cleaning products
Using these cleaning products can damage the touch screen.
To Next Page