This is done by mapping the external radio network VLAN priority to the internal radio CoS / priority using
the ‘PCP priority definition’ tab. The radio support 4 queues, thus at maximum an 8 -> 4 VLAN priority / CoS
mapping is done.
Default mapping of ingress packet VLAN priority to radio CoS / priority shown in the ‘PCP priority definition’
tab.
Default Priority
When the priority of an Ethernet port uses the PCP bits (VLAN priority) values the ‘Default Priority’ option
is enabled, allowing the priority of untagged VLAN frames to be set to Very High, High, Medium or Low
priority.
To Next Page
Loading...
