4RF Aprisa SR+ - Informational Events

Alarm Types and Sources | 461
Aprisa SR+ User Manual 1.11.1
Informational Events
Event
ID
Event Display
Text
Default
Severity
Function
Recommended Actions
26
User
authentication
succeeded
information
(5)
Event to indicate that a user is
successfully authenticated on the radio
during login. The information on the
user that was successfully
authenticated is provided in the
eventHistoryInfo object of the Event
History Log.
Information
No action required unless unexpected
27
User
authentication
failed
information
(5)
Event to indicate that a user has failed
to be authenticated on the radio during
login. The information on the user that
was unsuccessfully authenticated is
provided in the eventHistoryInfo object
of the Event History Log.
Check for possible intrusion attempt.
If unexpected follow cyber incident
report procedure.
28
Protection switch
failed
information
(5)
Event to indicate that a protection
switch-over cannot occur for some
reason. The reason for the failure to
switch is described in the
eventHistoryInfo object of the Event
History Log.
Investigate reason for switch over and
take remedial action.
29
Software System
Check
information
(5)
Event to indicate that the software has
done a system check on the radio. Any
information relevant to the cause of the
event is provided in the
eventHistoryInfo object of the Event
History Log.
Information
No action required unless unexpected
30
Software Start Up
information
(5)
Event to indicate that the radio
software has started. Any information
relevant to the software start up is
provided in the eventHistoryInfo object
of the Event History Log.
Information
No action required unless unexpected
33
Protection Switch
Occurred
information
(5)
Event to indicate that a protection
switch-over occurs for some reason.
The reason for the switch-over is
described in the eventHistoryInfo
object of the Event History Log.
Investigate reason for switch over and
take remedial action.
41
File Transfer
Activity
information
(5)
Event to indicate that a data file is
being transferred to or from the radio.
Information
No action required unless unexpected
42
Software
Management
Activity
information
(5)
Event to indicate that software is being
distributed to remote radios.
Information
No action required unless unexpected
43
Terminal Server
TCP Activity
information
(5)
Event to indicate TCP packets are being
transferred from the terminal server.
Information
No action required unless unexpected
55
Terminal Unit
Information
information
(5)
Event to indicate a miscellaneous
activity occurring on the radio
Information no action required unless
unexpected.
65
Event Action
Activity
information
(5)
Event to indicate an event action
occurring on the radio
Information
No action required unless unexpected
72
User SuperVisor
Session Logout
information
(5)
Event to indicate that a user has logged
out or the user session has timed out
Information
No action required unless unexpected
75
Config
Management
Activity
information
(5)
Event to indicate that there has been
some management activity related to
the configuration of the radio. As an
example, the configuration of the radio
has been changed via SNMP, or a new
configuration script has been loaded
into the radio.
Information
No action required unless unexpected
78
Security
Information
information
(5)
Security related events that occur on
the radio. This may include events that
report that a user account has been
locked or recovered. Or events related
to RADIUS authentication.
Refer to the event history logs for
details of the events.