Aprisa SR+ User Manual 1.11.1
SNMP Protocol
This parameter sets the SNMP Protocol:
All SNMP functions are disabled.
Allows all SNMP protocol versions.
Only SNMPv3 transactions will be accepted.
SNMPv3 With
Authentication Only
Only SNMPv3 transactions authenticated using HMAC-MD5 or
HMAC-SHA will be accepted (as per table below).
SNMPv3 With Encryption
and Authentication
Only SNMPv3 transactions authenticated using HMAC-MD5 or
HMAC-SHA with an encrypted type of DES or AES will be
accepted (as per table below).
The default setting is All Versions.
The default SNMPv3 with Authentication User Details provided are:
Authentication
Passphrase