Test Mode Timeout (s)
This parameter sets the Transmitter Test Mode timeout period. The radio MODE LED flashes when this Test
Mode is active. The radio will automatically exit Transmitter Test Mode after the Timeout period.
The default setting is 10 seconds and the maximum value is 43200 seconds (12 hours).
RSSI TEST BUTTON
Response Timeout (ms)
This parameter sets the time RSSI Test Mode waits for a response from the base station before it times out
and retries. The default setting is 3000 ms.
Transmit Period (sec)
This parameter sets the time between RSSI Test Mode requests to the base station. The default setting is
5 seconds.
Test Mode Timeout (s)
This parameter sets the RSSI Test Mode timeout period. The radio will automatically exit RSSI Test Mode
after the Timeout period. The default setting is 600 seconds.
To Next Page
Loading...
