4RF Aprisa SR+ - Page 285

Managing the Radio | 285
Aprisa SR+ User Manual 1.11.1
Active State
The Active State parameter sets the alarm state when the alarm is active.
Alarm Input
Option
Function
Low
The alarm is active low i.e. a ground contact on the port will cause
an active alarm state
High
The alarm is active high i.e. an open contact on the port will cause
an active alarm state
Alarm Output
Option
Function
Low
The alarm is active low i.e. the active alarm state will generate a
ground contact output
High
The alarm is active high i.e. the active alarm state will generate a
open contact output
Current State
The Current State shows the current state of the alarm.