4RF Aprisa SR+ - Page 403

Product Options | 403
Aprisa SR+ User Manual 1.11.1
SuperVisor Control Bar
The control bar is used for:
Position
Function
Left
Local
Provides full configuration and supervision of the local radio
Remote
Provides full configuration and supervision of the remote radio
Link
Provides configuration and supervision of the common local and
remote radio parameters
Right
The access level logged into SuperVisor. This label also doubles as
the SuperVisor logout button.
SuperVisor Alarm Bar
The alarm bar displays the radio name and alarms of the local radio i.e. the radio that SuperVisor is logged
into on the left and the remote radio name and alarms on the right.
The LED alarm indicators reflect the status of the front panel LEDs on the radios.