AMT/PTD/TR/0001/3/7/EN Installation Manual for digital sets - IP sets - SIP sets
Page 5-18 05/2008 To install sets and cartridges in the i7XX range
Important notes:
• Press to move to the next option, regardless of whether you are on a label field or on an
option entry field (that has or has not been completed).
• Press when on the first "Phone number" option to directly access the last "VLAN Id
Activation" option (if option = 0) or "Priority" (if option = 1) .
• You can confirm with at any time (in a label or entry field), even if only one field has been
modified, you will hear two validation beeps.
Except for compulsory fields that have a default value, any attempt to validate or move on to the
next option when a compulsory field is not filled in will generate refusal beeps.
Press at any time to cancel current programming without the modifications becoming
effective.
• If there is a power failure during the programming (or modification) phase, the changes will not
be saved.
• There is no "timeout" after accessing a configuration menu. You can only exit by pressing
or once.
Nota : Press to exit, even if you have not made any modification
To Next Page
Loading...
