Aastra M725 - Automatic Callback

12
Making a call
If your party does not answer:
Using the automatic callback function*
You can ask for an internal number to be called back automatically if it does not answer or is
busy.
Before replacing the handset:
1 - Press the key .
2 - Press the key or *.
An audible message and the display indicate that the
action has been validated.
As soon as the called party in question is free (if the line
was busy) or has enabled their telephone (if absent), your
handset rings. When you answer, your called party's set
that is "in callback" also rings.
Note: depending on the associated system version, you may need to
lift the handset before carrying out the operation.
- Successively press the keys or *.
The callback function is no longer enabled.
Enable automatic
callback:
Disable the automatic
callback function:
*Depending on the programming done by the system operator