37
The multi-line function
Communicating with the multi-line function
The multi-line function has been stored on at least two programmable keys on your set.
When a call arrives on your set that is multi-line programmed,
the indicator associated to the personalized key flashes.
Note: depending on the associated system version, you may need to
lift the handset before carrying out the operation.
- Press the programmed key.
Lift the handset to talk with the party. Lift the handset to
talk with the party.
The indicator associated to this key stays permanently
on. The display shows the calling party's identity.
If another party tries to reach you on the second line, you will
hear a beep and the indicator of a second key flashes.
- Press the programmed key with the flashing indicator to
take the second party.
The indicator associated to this key stays permanently
on.
You are in communication with the second party.
The screen displays the identity of the party that you are
talking to.
The other party is put on hold.
The indicator associated to this key flashes rapidly.
You are in communication with one party with another party
on hold.
- Successively press the programmed key with the rapidly
flashing indicator to switch from one party to the other.
The indicator associated to the key of the party you are
talking to stays permanently on and the display gives his
identity.
The indicator associated to the key of the party on hold
flashes rapidly.
Answer a second call:
Answer a call:
Switching between
parties:
Multiline 1
Multiline 2
Multiline 1
Multiline 2
Multiline 2
Multiline 1
To Next Page
Loading...
