51
Set settings
Personalizing the set's secret code
To access certain functions (unlocking the set, virtual desking function…) a secret code is
required. This code (different from the mail access code) is 0000 by default. You must
personalize this code before use (for example, to unlock the set).
Note: depending on the associated system version, you may need to lift the handset before carrying out
the operation.
1 - Successively press the keys or * .
The display indicates "CODE ?".
2- Enter the current code.
Note: if it has not been personalized, the code is 0000 by
default.
3- Enter the new code twice.
An audible signal and the display indicate that the action
has been validated.
Note: remember this code; you will need it to access certain
functions.
xxxx (Current code)
xxxx xxxx
*Depending on the programming done by the system operator
To Next Page
Loading...
