39
The supervision function
Communicating with the supervision function
You have programmed the supervision function of a set on a programmable key.
On your set, the status of the indicator associated to the programmed key varies according to
the status of the supervised set.
- When the supervised set is in standby, the indicator
associated to the key is off.
- When the line of the supervised set is busy, the indicator
associated to the key is on.
- When a call arrives on the supervised set, the indicator
associated to the programmed key flashes rapidly and if
programmed, your set emits an audible signal*.
The supervised set is called and you want to pick up the call:
- Press the programmed key then lift the handset to talk
to the party.
The indicator associated to the programmed key goes off.
You are in communication with a party and you want to
transfer the call to the supervised set:
- Press the programmed key then hang up.
The indicator associated to the programmed key lights
up.
You want to call the designated user of the supervised set:
- Press the programmed key.
The indicator associated to the programmed key lights
up.
When the called party answers, pick up the handset to
talk.
Pick up a call:
Transfer an inbound call
to the supervised set:
Call the supervised set:
Supervision 1
Supervision 1
Supervision 1
Supervision 1
Supervision 1
Supervision 1
To Next Page
Loading...
