20
The directories of abbreviated numbers
The directories of abbreviated numbers
These are directories stored at the system level.
- The personal directory is used to record your most frequently used numbers (up to 10,
numbered from 0 to 9).
- The group directory can be accessed by all the sets (even those for which outside access
is forbidden).
Note: depending on the associated system version, you must lift the handset before carrying out the
operation.
Programming a personal abbreviated number
You want to program a number:
1- Successively press the keys or *.
2 - Enter an abbreviated number from to .
3- Dial the party's number (preceded by 0 for an outside
party).
An audible message and the display indicate that the
action has been validated.
Reminder: use the red key to cancel or terminate a
programming sequence.
Erasing a personal abbreviated number
If you want to record a new number, you must erase the previous one first:
1- Successively press the keys or *.
2- Enter the chosen abbreviated number ( to ).
An audible message and the display indicate that the
action has been validated.
to
to
*Depending on the programming done by the system operator