Aastra M725 - Store and Redial Function

13
Making a call
Using the store and redial function
If your party does not answer or is busy, you can temporarily record their number in order to
call them back later (even if you dial other numbers in the meantime).
Notes:
- if you use this function regularly, consult your system operator who will program the function on a
program key on your set*.
- depending on the associated system version, you may need to lift the handset before carrying out the
operation.
Your party is busy or does not answer:
- Successively press the keys or *.
An audible message and the display indicate that the
action has been validated.
This number remains stored until it is redialed or erased.
You want to redial this number:
- Successively press the keys or *.
Note: you can also simply lift the handset and wait 5 seconds.
The set automatically calls the stored number.
When the called party answers, pick up the handset to
talk.
After the party has answered in callback mode, the
number is no longer stored.
You want to erase the stored number (for example, in order
to store another number):
- Successively press the keys or *.
An audible message and the display indicate that the
action has been validated. The number is erased.
Erase the stored number:
Store the number:
Call the stored number:
*Depending on the programming done by the system operator