19
During a call
During the conference call, you want to leave your two
parties talking to one another:
- Replace the handset.
he two parties stay in communication.
Note: if it fails, your set rings again.
Other features during a call
You want the number of the called or calling party (internal or
external) to be written in the logbook, for example, to identify
a malicious call.
During a call:
- Successively press the keys or *.
An audible message indicates that the action has been
validated. The number is automatically stored in the
logbook that can be consulted by the system operator.
You can replace the handset.
To protect the set against any call:
- Successively press the keys or *.
An audible message and the display indicate that the
action has been validated. During this call, any attempt to
call the set is ignored.
Terminating a call
- Replace the handset.
The line is free. The communication is terminated.
Leave the conference call:
Use the trace function:
Protect the call:
*Depending on the programming done by the system operator
To Next Page
Loading...
