27
The programmable keys
Changing programming
You want to change the programming of a key.
To do this:
- Record a new sequence.
The last program remains stored.
Erasing programming
You want to erase the programming of a key.
After selecting the key to delete the programming (the
associated indicator flashes):
- Enter the type code or *.
Press the key to finish.
Identifying the programmed keys
The paper label is used to indicate the name of the parties or functions programmed opposite
each key (4 positions).
1- Remove the transparent label protector by inserting a
pointed object in one of the lower notches.
2- Write the name of the party or programmed function in
the label opposite the key.
3- Replace the transparent protection.
Label
*Depending on the programming done by the system operator
To Next Page
Loading...
