Aastra M725 - Programmable Key Forwarding

30
The call forwarding function
Programming forwarding on a programmable key
For a repetitive type forwarding operation, we recommend storing the function on a
programmable key.
1- Press the key .
2- Press a programmable key.
The indicator associated to this key flashes.
2 - Enter the type code .
4 - Enter the forwarding sequence.
Example: followed by the extension number.
Note: if desired, you can simply store the sequence without the
extension number. Therefore, when enabled, you still have the
possibility of entering the extension number to which you want to
forward the call.
5 - Press the key to finish.
The indicator associated to the programmed key goes off.
You want to enable forwarding of your calls:
- Press the programmed key.
Note: depending on the key programming, the display prompts
you to enter the extension number to which you want to forward
the calls.
The forwarding function is enabled and the indicator
opposite the key lights up for reminder.
To find out the forwarding status, with the set in standby:
- Press the key .
Example: immediate forwarding to Mr. MARTIN's
extension.
Enable forwarding:
Forward
IMM->M.MARTIN
Display the forwarding
status: