25
The programmable keys
You can program the number to call an internal or external
party.
After selecting the key to be programmed (the associated
indicator flashes):
- Enter the type code or *.
- Dial the party's number without forgetting the network
access code if it is an external party (0 by default).
Press the key to finish.
Therefore, your party will be called by simply pressing this
key.
This is to program a series of codes that will be interpreted by
the set that already has a call in progress. For example, you
can program the sequence to access your voicemail.
After selecting the key to be programmed (the associated
indicator flashes):
- Enter the type code or *.
- Dial the
sequence.
Example: enter the voice mailbox number followed by # then the
personal code to access the mail system followed by #.
Press the key to finish.
Therefore, by simply pressing this key, you give the set with
a call in progress all the information required and quickly
accept the required service.
Program a number:
Program a series of
codes:
Voice mailbox No # code #
*Depending on the programming done by the system operator
To Next Page
Loading...
