Abarth 595 - Page 187

MULTIMEDIA
174
Switchingthesystem
on/off
The system is switched on/off by
pressing the
(ON/OFF) button/knob.
Turn the button/knob clockwise
to increase the radio volume or
anticlockwise to decrease it.
Radiomode
After the desired radio station is
selected, the following information is
shown on the display:
Atthetop: the list of radio stations
stored (preset) is displayed; the station
currently playing ishighlighted.
Inthemiddle: display of the name
of the current radiostation and the
buttons for selecting the previous or
next radio station.
Atthebottom: display of the following
buttons:
"Browse": list of theradio stations
available;
"AM/FM", "AM/DAB", "FM/DAB":
selection of the desired frequency band
(button reconfigurable according to the
band selected: AM, FM or DAB);
“Tune": manual radio station tuning
(not available for DAB radio);
"Info": additional information on the
source being listened to;
"Audio": access tothe "Audio
Settings" screen.
NOTE The DAB frequency can be used
in countries wheredigital transmission
technology is available. The device will
not be tuned to any frequency if the
DAB button is pressed in a country
where the serviceis not provided.
Audiomenu
The following adjustments can be
carried out using the "Audio" menu:
"Equalizer" (where provided);
“Balance / Fader" (left/right and
front/rear audio balance adjustment)
“Volume / Speed” (speed-dependent
automatic volumecontrol);
"Loudness" (whereprovided);
"Auto-On Radio";
"Radio Off Delay".
To exit the "Audio"menu, press the
/ Done button.
Mediamode
Audiosourceselection
Press the "Source" button to select the
desired audio source among those
available: AUX, USB or
Bluetooth®.
Applications used on portable devices
may be not compatible with the
Uconnect™ system.
Trackselection(Browse)
With Media mode active, briefly press
the
/graphic buttons to play
the previous/nexttrack or keep the
/buttons pressed to fast
rewind/forward thetrack.
For languages notsupported by
the system whichfeature special
characters (e.g. Greek), the keyboard
is not available. In these cases this
function will be limited.
Bluetooth®source
PairingaBluetooth® audiodevice
To pair a
Bluetooth® audio device,
proceed as follows:
activate the Bluetooth® function on
the device;
press the MEDIA button on the front
panel;
if the "Media" source is active, press
the "Source" graphic button;
select the Bluetooth® Media
source;
press the "Add Device" graphic
button;
search for Uconnect™ on the
Bluetooth® audio device (during the
pairing stage a screen is displayed
showing the progress of the operation);
when requested by the audio device,
enter the PIN codeshown on the
system display orconfirm on the device
the PIN displayed;
if the pairing procedure is completed
successfully, a screen is displayed.
Answer “Yes” to the question to pair
the
Bluetooth® audio device as
favourite (the devicewill have priority
over all other devices to be paired
subsequently). If "No" is selected, the