175
priority is determined according to the
order of connection. The last device
connected will have the highest priority;
an audio device can also be paired
by pressing the PHONE button on the
front panel and byselecting “Settings”
or, from the “Settings” menu, selecting
“Phone/Bluetooth”.
If the
Bluetooth® connection between
mobile phone andsystem is lost,
consult the mobilephone handbook.
The Radio may change the track being
played by modifyingthe name-device
in the
Bluetooth® settings of the
telephone (where provided), if the
device is connected via USB after the
Bluetooth® connection.
Phonemode
Phonemodeactivation
Press the PHONEbutton on the front
panel to activatethe Phone mode. Use
the graphic buttons on the display to:
dial the phone number (using the
graphic dial pad onthe display);
display and call the contacts in the
phonebook of themobile phone;
display and call contacts from the
registers of previous calls;
pair up to 10 phones/audio device
to make access and connection easier
and quicker;
transfer calls from the system to
the mobile phone and vice versa
and deactivate the microphone
audio for private conversations. The
mobile phone audiois transmitted
through the car’ssound system; the
system automatically mutes the radio
when the Phone function is used.
To consult the list of mobile phones
and supported functions, visit the
www.driveuconnect.eu website
Pairingamobilephone
To pair the mobile phone, proceed as
follows:
activate the Bluetooth® function on
the mobile phone;
press the PHONEbutton on the front
panel;
if no phone is paired with the system
yet, the display shows a dedicated
screen;
select “Yes" to start the pairing
procedure, then search for the
Uconnect™ device on the mobile
phone (if "No" is selected, the Phone
main screen is displayed);
when prompted by the mobile
phone, use its keypad to enter the PIN
code shown on the system display or
confirm on the mobile phone the PIN
displayed;
from the "Phone" screen you can
always pair a mobile phone by pressing
the "Settings" graphic button: press
the "Add Device" graphic button and
proceed as described above;
during the pairing stage a screen
appears on the display showing the
progress of the operation;
when the pairing procedure is
completed successfully, a screen
is displayed: answer "Yes" to the
question to pair themobile phone as
favourite (the mobilephone will have
priority over all other mobile phones
to be paired subsequently). If no other
devices are paired, the system will
consider the first paired device as the
favourite.
NOTE To ensureproper operation
after updating thephone software, it is
recommended toremove the phone
from the list of devices linked to the
radio, delete the previous system
pairing also from the list of
Bluetooth®
devices on the phone and make a new
pairing.
Makingaphonecall
The operations described below can
only be accessedif supported by the
mobile phone in use.
For all functions available, refer to the
mobile phone owner's handbook.
A call can be made by:
selecting theicon (mobile phone
phonebook);
selecting "RecentCalls";
selecting theicon;
To Next Page
Loading...
