Abarth 595 - Apple CarPlay and Android Auto

193
port and the contents of the phone
will be automatically shown on the
Uconnect™ system display.
To check the compatibility
of your smartphone, see the
indications on the websites:
https://www.android.com/intl/it_it/auto/
and http://www.apple.com/it/ios/carplay/.
If the smartphoneis connected
correctly to the car via the USB port,
the Apple CarPlayor Android Auto icon
will be displayed inplace of the
button in the mainmenu.
Android Auto– appconfiguration
Before use, download the Android Auto
application to yoursmartphone from
Google Play Store.
The application is compatible with
Android 5.0 (Lollipop) and later
versions.
To use Android Auto, the smartphone
must be connected to the car with a
USB cable. On the first connection,
you will have to perform the setup
procedure that appears on the
smartphone. Youcan only perform this
procedure with thevehicle stationary.
AppleCarPlay – app configuration
Apple CarPlay is compatible with the
iPhone 5 or more recent models, with
the iOS 7.1 operating system or later
versions.
Before using AppleCarPlay, enable Siri
from Settings > General > Siri on the
smartphone. To use Apple CarPlay, the
smartphone mustbe connected to the
car with a USB cable.
NOTE Enabling Apple CarPlay/Android
Auto or some functions could require
interaction on the smartphone. If
necessary, complete the step on your
device (smartphone).
Interaction
After the setup procedure, the
application will run automatically on
the
Uconnect™ system when your
smartphone is connected to the USB
port in the car. Youcan interact with
Apple CarPlay andAndroid Auto using
the steering wheel controls (long press
of the
button), using the SCROLL
TUNE button/knob to select and
confirm or using the
Uconnect™
system touchscreen.
Navigation
With the Apple CarPlay and Android
Auto applications, the user can choose
to use the navigation system on their
smartphone. If thesystem "Nav" mode
is already on, a warning pop-up will
appear on the
Uconnect™ system
display when a device is connected
to the car with a navigation session
in progress. The pop-up allows the
user to choose between using the
system navigationand using navigation
controlled by the smartphone.
The user can choose to change their
selection at any time by accessing the
navigation systemthat they want touse
and setting a newdestination.
Setting“AutoShowsmartphone
display onconnection"
Through the Uconnect™ system
settings, the usercan decide to
view the smartphone screen on the
Uconnect™ system display as soon
as the smartphone is connected via
the USB port. When this function is
set, each time a connection is made
via USB, the AppleCarPlay or Android
Auto apps will runautomatically on the
radio screen.
The "AutoShowsmartphonedisplay
onconnection"item can be found in
the "Display" submenu.
The function is enabled by default.
NOTES
Bluetooth® is disabled while Apple
CarPlay is being used
Bluetooth® remains on while
Android Auto is being used
The data connection will depend on
the tariff plan of thesmarphone
This information may be subject
to changes that depend on the
smartphone's operating system.