Abarth 595 - Page 62

49
Autoclose(Automatic
centrallockingwithcar
moving)
(where provided)
When activated (On), this function
locks the doors automatically when the
vehicle speed exceeds 20 km/h.
Proceed as followsto activate or
deactivate this function:
press the MENUbuttonbriefly to
display a submenu;
press theMENU button briefly,
the display will flash"On" or "Off"
depending on theprevious setting;
press + or – buttonto select;
press theMENU button briefly to
return to the submenu screen or hold
the button down to return to the main
menu screen without saving;
hold the MENU buttondown
again to return to the standard screen
or to the main menu according to
where you are in the menu.
Unitsofmeasurement
(Setting)
This function allowsthe measurement
unit to be set via two submenus:
“Distance” and “Fuel Consumption”.
To set the desiredunit of
measurement, proceed as follows:
briefly press the MENU button
: the display will show the two
submenus;
press the + or – button to move
between the twosubmenus;
once you have selected a submenu,
press the
MENU button briefly;
when you select “Distance”, briefly
pressing the MENU button
makes the displayshow "km" or "mi"
depending on theprevious setting;
press + or – buttonto select;
when you select “Fuel Consumption”,
briefly pressing theMENU button
makes km/l, l/100km or mpg appear
on the display depending on the
previous setting;
If the set distanceunit of measurement
is "km", the fuel consumption unit will
be displayed in km/l or l/100 km.
If the set distanceunit is "mi" the fuel
consumption unit will be displayed in
"mpg".
Press the + or – button to select.
When you have made the adjustment,
press the MENUbutton
briefly to
return to the submenu screen or hold
the button down to return to the main
menu screen without storing.
Hold the MENU buttondown
again to return to the standard screen
or to the main menu according to
where you are in the menu.
Language(Language
selection)
Messages on thedisplay can be shown
in the following languages: Italian,
English, German, Portuguese, Spanish,
French, Dutch, Polish, Turkish and
Russian.
To set the desiredlanguage, proceed
as follows:
briefly press the MENU button:
the previously set“language” will flash
on the display;
press + or – buttonto select;
press the MENUbuttonbriefly to
return to the menuscreen or hold the
button down to return to the standard
screen without storing.
Warningsvolume
(Adjustingthe
failure/warningacoustic
signalvolume)
This function allowsthe volume of the
buzzer which accompanies the display
of failures / warnings to be adjusted to
8 levels.
To set the desiredvolume, proceed as
follows:
briefly press the MENU button:
the previously setvolume level will flash
on the display;
press the + or – button to adjust;
press the MENUbuttonbriefly to
return to the menuscreen or hold the
button down to return to the standard
screen without storing.