ABB A43

Technical Description
2CMC48001M0201 65 A43/A44
Revision: C User Manual
5.7.5 Settings Log
This log stores an event when the transformer ratio or the number of elements
are reconfigured.
Contents The following information is stored in an event:
• Date and Time
• Firmware version
• Active Energy import
• Active Energy import L1
• Active Energy import L2
• Active Energy import L3
• Active Energy import Tariff 1
• Active Energy import Tariff 2
• Active Energy import Tariff 3
• Active Energy import Tariff 4
• Active Energy Export
• CT-Value
• VT-Value
• Number of elements
5.7.6 Event codes
Description
The following table describes the event codes that may occur in the System log,
the Event log and the Net quality log:
Event code
Event
41
Program CRC error
42
Persistent storage error
53
RTC circuit error
1000
U1 Missing Warning
1001
U2 Missing Warning
1002
U3 Missing Warning
1004
Negative Power Element 1 Warning
1005
Negative Power Element 2 Warning
1006
Negative Power Element 3 Warning
1007
Negative Total power Warning
1008
Frequency Warning
1010
Date Not Set Warning
1011
Time Not Set Warning
2013
Alarm 1 active