ABB ACQ580-34 - Page 119

24 V DC logic levels: "0" < 5 V, "1" > 13 V
R
in
: 2.47 kohm
Terminal size: 0.14…2.5 mm
2
Safe torque off (STO) inputs IN1
and IN2 (Term. 37 and 38)
Connector pitch 5 mm, wire size 2.5 mm
2
Physical layer: EIA-485
Cable type: Shielded twisted pair cable with twisted pair for data and a wire
or pair for signal ground, nominal impedance 100…165 ohms, for example
Belden 9842
Transmission rate: 9.6…115.2 kbit/s
Termination by switch
Embedded fieldbus (X5)
EIA-485, male RJ-45 connector, max. cable length 100 m (328 ft)Control panel - drive connection
USB Type Mini-B, max. cable length 2 m (7 ft)Control panel - PC connection
Control unit 119