ABB ACS880 PCP - Page 151

Parameters 151
Ready run Bit 1 of 06.11 Main status word (see page 117). 2
Enabled Bit 0 of 06.16 Drive status word 1 (see page 117). 4
Started Bit 5 of 06.16 Drive status word 1 (see page 117). 5
Magnetized Bit 1 of 06.17 Drive status word 2 (see page 118). 6
Running Bit 6 of 06.16 Drive status word 1 (see page 117). 7
Ready ref Bit 2 of 06.11 Main status word (see page 117). 8
At setpoint Bit 8 of 06.11 Main status word (see page 117). 9
Reverse Bit 2 of 06.19 Speed control status word (see page 120). 10
Zero speed Bit 0 of 06.19 Speed control status word (see page 120). 11
Above limit Bit 10 of 06.17 Drive status word 2 (see page 118). 12
Warning Bit 7 of 06.11 Main status word (see page 117). 13
Fault Bit 3 of 06.11 Main status word (see page 117). 14
Fault (-1) Inverted bit 3 of 06.11 Main status word (see page 117 ). 15
Open brake
command
Bit 0 of 44.01 Brake control status 22
Ext2 active Bit 11 of 06.16 Drive status word 1 (see page
117). 23
Remote control Bit 9 of 06.11 Main status word (see page 117). 24
Supervision 1 Bit 0 of 32.01 Supervision status (see page 251). 33
Supervision 2 Bit 1 of 32.01 Supervision status (see page 251). 34
Supervision 3 Bit 2 of 32.01 Supervision status (see page 251). 35
RO/DIO control word
bit0
Bit 0 of 10.99 RO/DIO control word (see page 134). 40
RO/DIO control word
bit1
Bit 1 of 10.99 RO/DIO control word (see page 134). 41
RO/DIO control word
bit2
Bit 2 of 10.99 RO/DIO control word (see page 134). 42
RO/DIO control word
bit8
Bit 8 of 10.99 RO/DIO control word (see page 134). 43
RO/DIO control word
bit9
Bit 9 of 10.99 RO/DIO control word (see page 134). 44
Other [bit] Source selection (see Terms and abbreviations on page
101).
-
No. Name/Value Description Def/
FbEq16