ABB ETL600 User Manual

ETL600 1KHW001489-EN ABB Switzerland Ltd
10. STORAGE, DECOMMISSIONING AND DISPOSAL
10.1. Safety instructions
Personnel qualification
DANGER
An authorized and properly trained personnel only is
admitted to carry out installing, programming,
commissioning, maintenance, troubleshooting and
work of the equipment.
Mechanical Installation
DANGER
The equipment must be mounted in a cabinet.
DANGER
Cabinets, which are not secured to the floor, tip
forwards when the hinged frame is opened. Do not
open the hinged frame without precautions.
ESD protection
Caution
ESD
The modules in this equipment contain devices,
which can be damaged by electrostatic discharges.
Appropriate measures must be taken before
unpacking modules or withdrawing them from
equipment racks. Essential precautions to prevent
ESD damage when handling or working on modules
are grounding straps for technical personnel and the
provision of anti-static workbenches. Modules may
only be shipped either in their original packing or
installed in equipment racks.
Electrical Installation
DANGER
The circuit breaker for the power supply (B9AS) of
the equipment must be switch OFF.
The circuit breakers for optional equipment in the
cabinet must be switch OFF.
DANGER
Do not connect or disconnect energized cables to or
from the equipment.
DANGER
The isolating terminals from the external cables
must be kept open during installation, maintenance
and before storage, decommissioning and disposal.
Storage, Decommissioning and Disposal November 2005 10-1

ABB ETL600 Specifications

General

Brand	ABB
Model	ETL600
Category	Touch terminals
Language	English