ABB Switzerland Ltd 1KHW001489-EN ETL600
2.2. Basic principles
The ETL equipment complies with the latest standards of engineering
and the recognized safety regulations. In spite of this, hazards could
arise with inappropriate operation of the equipment.
The ETL equipment should only be operated in fault free condition and
within the guidelines lay down in the instruction manual.
2.3. General instructions
Personnel qualification
DANGER
An authorized and properly trained personnel only is
admitted to carry out programming, commissioning,
maintenance, troubleshooting and work of the
equipment.
Instruction manual
DANGER
The instruction manual should be read and clearly
understood before working on the equipment.
Safety and monitoring facilities
DANGER
Mechanical safety facilities such as cover plates
must not be removed or by-passed.
Alteration
DANGER
Alteration of the equipment is not allowed.
Warning labels
DANGER
Precautions and indications to hazardous voltages
and hazardous energy level must be strictly
observed.
2.4. ons
Technical specif
Product-specific instructi
ications
DANGER
The equipment must be operated within the
technical specifications. Failure to do so may result
in personal injuries or equipment damage.
2-2 November 2005 Safety Instructions
To Next Page
Loading...
