ETL600 1KHW001489-EN ABB Switzerland Ltd
2. SAFETY INSTRUCTIONS
2.1. Safety information
The ETL600 equipment itself is safe and without any risk. This is not
valid for its containment and the peripheral surrounding, like the high
voltage area and lines. Only service personnel is therefore allowed to
execute all the steps and manipulations described in this manual.
Some of the operations may also be carried out by operators, refer to
section 1.
2.1.1. In this instruction manual
In this manual the safety instructions are marked as follows:
DANGER
Information or do’s and don’ts to prevent serious
personal injury or extensive equipment damage.
Caution
Specific information or do’s and don’ts to prevent
minor damage and operating problems.
Note:
Specific information with regard to the optimum use o
the appliance.
2.1.2. On the equipment
On the Equipment, safety instructions are marked as follows:
DANGER
Hazardous voltage and hazardous energy level.
Beware of electric shock.
Caution
Specific information to prevent minor damage and
operating problems.
Caution
Specific information to prevent person
hot surface
al injury or
damage due to contact to hot surfaces.
Caution
ESD
Specific information to prevent equipment damage
by electrostatic discharge.
Safety Instructions November 2005 2-1
To Next Page
Loading...
