Safety instructions 11
Safety instructions
What this chapter contains
The chapter contains the warning symbols used in this manual and
the safety instructions which you must obey when you install or
connect an optional module to a drive, converter or inverter. If you
ignore the safety instructions, injury, death or damage can occur.
Read this chapter before you start the installation.
Use of warnings
Warnings tell you about conditions which can cause injury or
death, or damage to the equipment. They also tell you how to
prevent the danger. The manual uses these warning symbols:
Electricity warning tells you about hazards from
electricity which can cause injury or death, or damage to
the equipment.
General warning tells you about conditions, other than
those caused by electricity, which can cause injury or
death, or damage to the equipment.
To Next Page
Loading...
Need help?
General
