About the manual 15
Contents
The manual consists of the following chapters:
• Safety instructions presents the safety instructions which you
must follow when installing a fieldbus adapter module.
• About the manual introduces this manual.
• Overview of the PROFIBUS network and the FPBA-01 module
contains a short description of the PROFIBUS network and the
adapter module.
• Mechanical installation contains a delivery checklist and
instructions on mounting the adapter module.
• Electrical installation contains instructions on cabling,
connecting the module to the PROFIBUS network and bus
termination.
• Start-up presents the steps to take during the start-up of the
drive with the adapter module and gives examples of
configuring the master system.
• Communication profiles describes the communication profiles
used in the communication between the PROFIBUS network,
the adapter module and the drive.
• Communication protocol describes the PROFIBUS messaging
used in the communication with the drive and in PROFIBUS
slave device configuration messages.
• Diagnostics explains how to trace faults with the status LEDs
on the adapter module.
• Technical data contains the technical data of the adapter
module and the PROFIBUS link.
• Appendix A – PROFIdrive parameters contains a list of the
PROFIdrive parameters.
• Appendix B – I&M records contains the telegram and response
structures for Identification & Maintenance records.
To Next Page
Loading...
Need help?
General
