16 About the manual
Terms and abbreviations used in this manual
General terms and abbreviations
Term/abbreviation Explanation
Communication module Communication module is a name for a device
(eg, a fieldbus adapter) through which the drive
is connected to an external communication
network (eg, a fieldbus). The communication
with the module is activated with a drive
parameter.
Command word See Control word.
Control word 16-bit word from master to slave with bit-coded
control signals (sometimes called the
Command word).
FPBA-01 PROFIBUS
DP adapter module
One of the optional fieldbus adapter modules
available for ABB drives. FPBA-01 is a device
through which an ABB drive is connected to a
PROFIBUS network.
Parameter Operating instruction for the drive. Parameters
can be read and programmed with the drive
control panel, drive PC tools or through the
adapter module.
PLC Programmable logic controller
Profile Adaptation of the protocol for certain application
field, for example, drives.
In this manual, drive-internal profiles (eg, DCU
or FBA) are called native profiles.
Status word 16-bit word from slave to master with bit-coded
status messages
To Next Page
Loading...
Need help?
General
