About the manual 13
About the manual
What this chapter contains
This chapter introduces this manual.
Applicability
This manual applies to the FPBA-01 PROFIBUS DP adapter
module, SW version 3.10 or later.
Compatibility
The FPBA-01 PROFIBUS DP adapter module is compatible with
the following drives: ACSM1, ACS355, ACS380, ACS580,
ACH580, ACS850, ACQ810, ACS880, ACS880-M04, etc.
The FPBA-01 PROFIBUS DP adapter module is compatible with
all master stations that support the PROFIBUS DP-V0 and DP-V1
protocols.
Note: The adapter module is compatible with more drives that may
not be listed here. For details of compatibility, check the drive’s
firmware manual.
Target audience
The reader is expected to have a basic knowledge of the fieldbus
interface, electrical fundamentals, electrical wiring practices and
how to operate the drive.
To Next Page
Loading...
