ABB FPBA-01 PROFIBUS DP - Page 129

Communication protocol 129
8 DPV1_Status_2 (DP-V1 only) (Not supported)
xxxxxx0x
Chk_Cfg_Mode
0 = Chk_Cfg according to EN
50170 (default state)
1 = User-specific evaluation of
Chk_Cfg
MSB LSB
Enable_Update_Alarm
0 = Enable_Update_Alarm
disabled
1 = Enable_Update_Alarm
enabled
Reserved.
To be parameterized with ‘0’.
Enable_Status_Alarm
0 = Enable_Status_Alarm
disabled
1 = Enable_Status_Alarm
enabled
Enable_Diagnostic_Alarm
0 = Enable_Diagnostic_Alarm
disabled
1 = Enable_Diagnostic_Alarm
enabled
Enable_Process_Alarm
0 = Enable_Process_Alarm
disabled
1 = Enable_Process_Alarm
enabled
Enable_Pul_Plug_Alarm
0 = Enable_Pull_Plug_
Alarm disabled
1 = Enable_Pull_Plug_
Alarm enabled
Enable_Manufacturer_
Specific_Alarm
0 = Enable_Manufacturer_
Specific_Alarm disabled
1 = Enable_Manufacturer_
Specific_Alarm enabled