180 Technical data
Mounting: Into the option slot on the drive
Degree of protection: IP20
Ambient conditions: The applicable ambient conditions specified
for the drive in its manuals are in effect.
Indicators: Three bicolor LEDs (HOST, MODULE, NETWORK)
Connectors:
• 20-pin connector to drive (X2)
• 9-pin D-SUB connector to bus (X1)
Power supply:
• +3.3 V ±5% max. 450 mA (supplied by the drive)
• Isolated +5 V supply available for bus termination circuitry (X1
pins 5 and 6). 30 mA max.
General:
• Complies with EMC standard EN 61800-3:2004
• Bus interface functionally isolated from drive
• Coated circuit board.
To Next Page
Loading...
