ABB IRB 6620 - Page 55

Fitting the transport support
Illustration for fitting the transport support
A
B
xx1400000944
Fitting the transport support
NoteAction
Do not tighten the screw.Fit the transport support’s lower end to the
robot using the recommended screw joint,
(A) in figure.
1
See attachment point for the specific ro-
bot in the section Transport position with
a transport support on page 51.
Continues on next page
Product manual - IRB 6620 55
3HAC027151-001 Revision: T
© Copyright 2006-2018 ABB. All rights reserved.
2 Installation and commissioning
2.3 Securing the robot with a transport support
Continued