ABB IRB 6660 - Page 319

NoteAction
xx1000001392
Make sure the small o-ring around the oil hole
is fitted properly!
3
Specified in Required equipment on
page 311.
xx1000001395
Attach the lifting accessory, base and gear 1
and the lifting tool (chain) to the gearbox.
4
Specified in Required equipment on
page 311.
Fit two guide pins in two of the attachment
holes in the gearbox, parallel to each other.
5
CAUTION
The gearbox weighs 200 kg.
All lifting accessories used must be sized ac-
cordingly!
6
Continues on next page
Product manual - IRB 6660 319
3HAC028197-001 Revision: S
© Copyright 2007-2018 ABB. All rights reserved.
4 Repair
4.7.1 Replacing the axis 1 gearbox
Continued