Apparatus control
ABB Network Partner AB
1MRK 580 150-XEN
Page 6 - 79
Version 1.0-00
BExx-FDB_SEL6 Correct selection relay is energized for
apparatus 6
BExx-FDB_SEL7 Correct selection relay is energized for
apparatus 7
BExx-FDB_SEL8 Correct selection relay is energized for
apparatus 8
BExx-BINPERR Indication for binary input board error
BExx-BOUTERR Indication for binary output board error
BExx-BRLYERR Indication for external relay error
BExx-AU_OP_V1 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 1
BExx-AU_OP_V2 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 2
BExx-AU_OP_V3 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 3
BExx-AU_OP_V4 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 4
BExx-AU_OP_V5 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 5
BExx-AU_OP_V6 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 6
BExx-AU_OP_V7 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 7
BExx-AU_OP_V8 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 8
Table 10: Output signals for BAYCONE
OUT: DESCRIPTION:
To Next Page
Loading...
