Apparatus control
ABB Network Partner AB
1MRK 580 150-XEN
Page 6 - 83
Version 1.0-00
BFxx-FDB_SEL2 Correct selection relay is energized for
apparatus 2
BFxx-FDB_SEL3 Correct selection relay is energized for
apparatus 3
BFxx-FDB_SEL4 Correct selection relay is energized for
apparatus 4
BFxx-FDB_SEL5 Correct selection relay is energized for
apparatus 5
BFxx-FDB_SEL6 Correct selection relay is energized for
apparatus 6
BFxx-FDB_SEL7 Correct selection relay is energized for
apparatus 7
BFxx-FDB_SEL8 Correct selection relay is energized for
apparatus 8
BFxx-BINPERR Indication for binary input board error
BFxx-BOUTERR Indication for binary output board error
BFxx-BRLYERR Indication for external relay error
BFxx-AU_OP_V1 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 1
BFxx-AU_OP_V2 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 2
BFxx-AU_OP_V3 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 3
BFxx-AU_OP_V4 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 4
BFxx-AU_OP_V5 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 5
BFxx-AU_OP_V6 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 6
BFxx-AU_OP_V7 Automatic operation permitted, i.e. the oper-
ator place selector is not in Local position,
the apparatus is not reserved or not manual
selected for apparatus 7
Table 12: Output signals for BAYCONF
OUT: DESCRIPTION:
To Next Page
Loading...
