ABB rec670 - IED Identifiers TERMINALID

Section 23 Basic IED functions
23.1 IED identifiers TERMINALID
IP15060-1 v2
23.1.1
Application
M15324-3 v6
IED identifiers (TERMINALID) function allows the user to identify the individual IED
in the system, not only in the substation, but in a whole region or a country.
Use only characters A-Z, a-z and 0-9 in station, object and unit names.
23.2 Product information PRODINF
GUID-F67243CA-2429-4118-BBFF-3D62BF55E080 v2
23.2.1 Application
GUID-D78786E6-C34A-4E63-9D1E-0582C8F1F7E1 v8
Product information contains unchangeable data that uniquely identifies the IED.
Product information data is visible on the local HMI under Main menu/
Diagnostics/IED status
/Product identifiers and under Main menu/Diagnostics/IED
Status/Identifiers:
• ProductVer
• ProductDef
• FirmwareVer
• SerialNo
• OrderingNo
• ProductionDate
• IEDProdType
This information is very helpful when interacting with ABB product support (for
example during repair and maintenance).
1MRK 511 401-UUS A Section 23
Basic IED functions
Bay control REC670 2.2 ANSI 607
Application manual