23.9 Signal matrix for binary outputs SMBO
SEMOD55215-1 v2
23.9.1 Application
SEMOD55213-5 v4
The Signal matrix for binary outputs function SMBO is used within the Application
Configuration tool in direct relation with the Signal Matrix tool. SMBO represents the
way binary outputs are sent from one IED configuration.
23.9.2
Setting guidelines
SEMOD55228-5 v2
There are no setting parameters for the Signal matrix for binary outputs SMBO
available to the user in Parameter Setting tool. However, the user must give a name to
SMBO instance and SMBO outputs, directly in the Application Configuration tool.
These names will define SMBO function in the Signal Matrix tool.
23.10 Signal matrix for mA inputs SMMI
SEMOD55233-1 v2
23.10.1 Application
SEMOD55237-5 v2
The Signal matrix for mA inputs function SMMI is used within the Application
Configuration tool in direct relation with the Signal Matrix tool. SMMI represents the
way milliamp (mA) inputs are brought in for one IED configuration.
23.10.2 Setting guidelines
SEMOD55247-5 v2
There are no setting parameters for the Signal matrix for mA inputs SMMI available to
the user in the Parameter Setting tool. However, the user must give a name to SMMI
instance and SMMI inputs, directly in the Application Configuration tool.
23.11 Signal matrix for analog inputs SMAI
SEMOD55751-1 v2
1MRK 511 401-UUS A Section 23
Basic IED functions
Bay control REC670 2.2 ANSI 613
Application manual
To Next Page
Loading...
Need help?
General
