• Single breaker (double or single bus) arrangement (A30)
• Double breaker arrangement (B30)
•
Breaker-and-a-half arrangement for a complete diameter (C30)
• Single breaker (double bus) arrangement with PMU functionality (D30)
Optional functions are available in PCM600 Application Configuration Tool and can
be configured by the user. Interface to analog and binary IO:s are configurable without
need of configuration changes. Analog and control circuits have been pre-defined.
Other signals need to be applied as required for each application. The main differences
between the packages above are the interlocking modules and the number of
apparatuses to control.
Section 3 1MRK 511 401-UUS A
Configuration
60 Bay control REC670 2.2 ANSI
Application manual
To Next Page
Loading...
