3.5.1 Connectivity packages
A connectivity package is a software component that consists of executable code
and data which enable system tools to communicate with a protection relay.
Connectivity packages are used to create configuration structures in PCM600.
A connectivity package includes all the data which is used to describe the
protection relay. For example, it contains a list of the existing parameters, data
format used, units, setting range, access rights and visibility of the parameters. In
addition, it contains code which allows the software packages that use the
connectivity package to properly communicate with the protection relay.
3.5.2 PCM600 and relay connectivity package version
• Protection and Control IED Manager PCM600 Ver.2.11 or later
• REX610 Connectivity Package Ver.1.0 or later
Download connectivity packages from the ABB Web site
abb.com/mediumvoltage or directly with Update Manager in
PCM600.
3.6 Modification Sales
Modification Sales is a concept that provides modification support for already
delivered relays. Under Modification Sales it is possible to add protection functions
by adding a hardware module. The same options are available as when a new relay
variant is configured and ordered from the factory: it is possible to add new
hardware modules into empty slots or change the type of the existing modules
within the slots.
Section 3 2NGA000823 A
REX610 overview
24 REX610
Operation Manual
To Next Page
Loading...
