Disturbance records !
Number of recordings
=4
Rem. amount of rec.
=96
A
GUID-0200EE8C-9186-4963-B5A3-4B5E4041A08C V1 EN-US
Figure 27: Changing the value
The disturbance recorder is now triggered.
6.1.3.2 Monitoring disturbance recorder data
Disturbance recordings can be uploaded from the protection relay with PCM600 to
monitor disturbance recorder data. Individual disturbance recordings can be
viewed.
1. Select Main menu/Disturbance records.
All the disturbance recorder information is listed.
2.
Scroll the view with or .
The following items are listed in the view:
• Number of recordings currently in the protection relay's memory.
• Remaining amount of recordings that fit into the available recording
memory.
• Recording memory used in percentage.
• If the periodic triggering function is used, the time to trigger which
indicates the remaining time to the next periodic triggering of the
disturbance recorder.
Disturbance records
Rec. memory used
=0 %
Trig recording
=Cancel
A
!
GUID-61B0EFA0-990B-4460-8776-C67C558E739C V1 EN-US
Figure 28: Monitoring disturbance recorder via the LHMI
6.1.3.3 Controlling and reading of disturbance recorder data
Disturbance recorder data can be controlled and read with PCM600. Disturbance
records are stored in the internal memory and storage can be extended using the SD
card. Later the data can be accessed using PCM600 or a COMTRADE reader tool.
For more information, see the PCM600 documentation.
Section 6 2NGA000823 A
Operating procedures
46 REX610
Operation Manual
To Next Page
Loading...
