ABB REX610 - Section 4 Using Local HMI; Logging In to the LHMI

Section 4 Using local HMI
4.1 Logging in
To use the LHMI, logging in and authorization are required. Password
authorization is disabled by default and can be enabled via the LHMI.
To enable password authorization, select Main menu/
Configuration/Authorization/Passwords. Set the Local override
parameter to “False”.
1.
Press to activate the login procedure.
2.
Press or to enter the username character by character.
Login
Select user
=VIEWER
GUID-17B1984C-9E98-49CF-B108-12D80C131481 V1 EN-US
Figure 5: Selecting access level
3.
Confirm the selection with .
4. Enter the password when prompted character by character.
Special characters are not allowed.
•
Activate the digit to be entered with and .
•
Enter the character with and .
2NGA000823 A Section 4
Using local HMI
REX610 25
Operation Manual