ABB REX610 - DST Parameters and Setting Groups

DST off date (day): 25
DST off date (month): October
DST off day (weekday): Sunday
If DST on day (weekday) and DST off day (weekday) are set to
"reserved", the exact day for the DST shift does not have to be set.
To disable the DST, set the DST in use parameter to "False".
8.4.4 Setting protection relay parameters
8.4.4.1 Defining setting groups
Selecting a setting group for editing
1. Select Main Menu/Settings/Edit setting group.
2.
Select the setting group to be edited with or .
3.
Press to confirm the selection.
4. Edit the settings.
REX610
!
Edit group: ↕+_2
Active group=1
A
GUID-F4032493-0788-4A2E-8191-DC577EE2BB5F V1 EN-US
Figure 54: Selecting a setting group
Browsing and editing setting group values
1.
Select Main menu/Settings/Settings and press .
2.
Select the setting group to be viewed with or and press to confirm
the selection.
Section 8 2NGA000823 A
Commissioning
78 REX610
Operation Manual