ABB REX610 - Device Identification - Composition Code; Configuring the SD Card

4.4.2 Identifying relay’s composition code
The relay’s composition code identifies the relay composition based on the
hardware modules present in the relay.
1. Select Main menu/Information/Product Identifiers.
2.
Enter the submenu with
.
Product identiers !
Composition code
=REX6101GABANNNNA
SW version
=1.0.0
A
GUID-D1CB5CB8-C0F1-4DCA-992D-A6CEF0597AAC V1 EN-US
Figure 12: Composition code
4.5 Configuring SD card
SD card is supported in the relay. It should be formatted in FAT32 format.
1. Select Main menu/Configuration.
2.
Enter the submenu with
to transfer disturbance records to the SD card.
SD card !
Transfer to SD card
A
GUID-363BBA43-38E9-41A3-8824-A26659CDB283 V1 EN-US
Figure 13: SD card
4.6 Adjusting display contrast
Adjust the display contrast anywhere in the menu structure to obtain optimal
readability.
•
To increase the contrast, press simultaneously and .
•
To decrease the contrast, press simultaneously and .
2NGA000823 A Section 4
Using local HMI
REX610 29
Operation Manual