ABB REX610 - Copying Setting Groups; Browsing and Editing Setting Group Values

Setting group
Active group
=
↦
+_1
Copy group 1
=Cancel
A!
GUID-2C0AF084-F604-45E3-B7C8-7A152B31950C V1 EN-US
Figure 38: Selecting the active setting group
4. Commit the settings.
Remember to document the changes made.
6.4.1.2 Copying a setting group
Setting group 1 can be copied to another group or to all available groups.
1.
Select Main menu/Settings/Setting group/Copy group 1 and press .
2.
Change the options with or and press to confirm the selection.
Setting group
Active group
=1
Copy group 1
=Copy 1 into 4
A!
GUID-795E9463-93EC-4FB4-8E34-100C6963B481 V1 EN-US
Figure 39: Copying setting group 1 into 4
6.4.1.3 Browsing and editing setting group values
1.
Select Main menu/Settings/Settings and press .
2.
Select the setting group to be viewed with or and press to confirm
the selection.
Section 6 2NGA000823 A
Operating procedures
52 REX610
Operation Manual