ABB RMC-100 - Page 72

72 | RMC-100| 2105552MNAE
Figure 4-35: TFIO-B Bus Enable tab (bus disabled by default)
5. Select the TFIO-B Bus field to change to Enabled.
6. Click Send. The TFIO Bus Enabled screen clears and the navigation tree refreshes.
7. Select TFIO-B Modules from the navigation tree. The TFIO Module Setup tab displays (
Figure
4-36).
Figure 4-36: TFIO-B Module Setup
8. Click the TFIO Module List tab.
9. Verify all TFIO modules are connected and their type listed (Figure 4-37
).