2105552MNAE | RMC-100 | 79
3. Click the two-digit time group (hours, minutes, or seconds) in Scroll Lock Timeout and type the
time. Or click the up and down arrows to set the scroll lock time.
Figure 5-7: Change default Display Setup
4. Click Send to save the changes. The Setup screen displays the new number of display groups
(Figure 5-8
).
Figure 5-8: Display setup for two display groups
5. Expand Display on the navigation tree. The navigation tree displays the new group with a
default name: Display Group 2 (Figure 5-9
).
To Next Page
Loading...
